Monitor Trailer MT 2400

FFS MT2400 Monitor Trailer is designed for high volume flows from 4000 gpm up to 12000 gpm and capable of inducing foam solution at the monitor nozzle. The trailer are built from 316 stainless with integrated ballast tank / dual axle self lowering suspension to reduce set up time and bring inlet manifolds as close as possible to the surface. The 4 stabilizer jacks are fitted with dual speed hand crank gear box to further reduce set up time. Ergonomically configured low friction loss water inlet manifold are manufactured from 316 stainless steel to match customers specific requirements, optimizing spacing and easy access while ensuring couplings are as low as possible for easy coupling and de-coupling of large diameter hose.

Easy step on and off access are provided to the front of the trailer with integrated non-slip step with permanently mounted hand rail. The monitor deck are configured with non slip grating. The ballast tank fill valve are fitted at the deck level to facilitate easy access and operation from the deck or the rear end of the trailer monitor. The monitor and nozzle design are optimized by using state of the art fluid dynamics using dual yoke water- way for minimal internal pressure losses in combination with excellent throw characteristics. The monitors are of compact and robust design and require minimal maintenance. Variable flow setting are easy adjustable directly on the nozzle to suite any volume or pressure range setting from 4000 to 12000 gpm.

The monitor movement are controlled via gear drives that allow for swift and easy movement while flowing water regardless of angle. Trailer tow hitch are nato pintle type or ball type based on customer requirements. The trailers are configured with EU, standardized lighting package configuration. Main castings, welding and machining of parts are all done in Scandinavia. Each unit is assembled, pressure- and function tested in our 8,000 sq. m. factory in Sweden with highly qualified personnel and the latest ISO 9001 management system.
Monitor:
» Nozzle Flow Rate : Adjustable (4.000 to 12.000 US gpm) variable stream pattern hand wheel adjusted
» Nominal Pressure : 7-10 bar (100-145 psi)
» Design Pressure : 16 bar (232 psi)
» Nozzle Material : High quality 316 Stainless Steel / Ni-Al Bronze materials
» Rotation : 360° Hand wheel gear
» Elevation : +15° to +80° hand wheel gear
» Hydrostatic Test : 1.5 MAWP
» Monitor Material : High quality Stainless Steel / Ni-Al Bronze materials
» Foam Connection : 4” (100 mm) Swivel with Storz coupling
» Monitor Flange : DIN DN300 Twelve inch (12’’) 304 mm
» Pressure Gauge : Glycerine filled pressure gauge with measurement in metric and imperial
Manifold:
» Primary Inlets : 2 x 12’’ (300 mm) /4 lug Storz hard coated anodized aluminium
» Secondary Inlets : 4 x 6’’ (150 mm) /3 lug Storz hard coated anodized aluminium with non return valves
» Manifold Diameter : 12’’ (304mm)
» Manifold Material : AISI 316 L
» Flange Bolts : A4 Stainless steel
Trailer Body:
» Frame & Chassis : AISI 316 L
» Dry Weight : 4,299 lb (1,950 kg)
» Ballast Reservoir Capacity : 792 gallon (3,000 L)
» Ballast Drains : 2 x 2’’ AISI 316 ball valves
» Total Wet Weight : Approx. 11,023 lb (5,000 kg)
» Support Legs : 4 x dual speed adjustable
» Drawbar : Height-adjustable, NATO Ø76 or ball type
» Jockey Wheel : Heavy duty height adjustable
» Brakes : Mechanical with over run hitch brake
» Hand Brake : Mechanical lever with adjustable tension linkage
» Axles : Dual axle with lowerable chassis
» Wheels & Tyres : 15’’ Aluminium
» Electrical : EU road regulations 12 volt
» Reflectors Side : Amber
» Reflectors Rear & Front : Red
Paint:
» Primer : Base coat grey epoxy min.DFT 100μm
» Top coat : Top coat RAL 3002 PUR min.DFT 75μm
Accessories:
» 1 x Equipment tool box (removable)
» 1 x 10ft (3 m) x 4 ‘’ (100 mm) non collapsible solution hose with 4’’ (100 mm) Storz couplings
» 1 x 4Clappered Siamese with 4’’ (100 mm) Storz Couplings
» 1 x 4’’ Storz blank cap
» 4 x 6’’ Hard coated anodized Storz blank cap with safety lanyard
» 2 x 12’’ Hard coated anodized aluminium blank cap with safety lanyard
» 2 x 6’’ jumbo Storz spanners
» 2 x 12’’ Storz power bars
» 1 x Spare wheel
» 1 x Wheel spanner